EFFICIENT GAS DETECTION

Our gas detector does double duty, detecting combustible gases like methane and propane. A built-in extension cord lets you plug it into a low outlet but mount it higher, where natural gas or carbon monoxide gas leaks rise.

SMART & DIGITAL DISPLAY

The digital display will illuminate with the current hazard level when the alarm is activated, or when you push any button. This is an easy way to keep on the watch for serious gas leaks, but several would be needed for adequate coverage of an entire house. 

USE IT IN FEW STEPS

Easy to use, after a brief warm-up, place the unit in the room you want to measure, and leave it for a time until the reading has been taken. To get a more accurate reading, leave the device to take multiple readings over a number of days.

EASY TO INSTALL

Plug in this gas leak detector to a standard household outlet, and it will monitor for hazardous gases in your home. Energy saving, it will be your great helper and remind you the leaking gases in time.

INTELLIGENT VOICE COMMANDS

Intelligent voice prompt. While the gas concentration is out of standard, the detector will be triggered and prompt with voice. Adopts catalytic combustion sensor which features high stability and high sensitivity. It can protect household and commercial safety to the highest extent.

1, Plug-in Type (Y302) Installation

Directly plug into the power socket. Scientific and compact design leaves the 2nd outlet free for other devices.

2, Extension Type (Y301) Installation

Smooth walls use 3M circular double side adhesive sticker or fasten the detachable back plate by 2 sets of mounting screws.

Rough walls only use 2 sets of mounting screws to fasten the detachable back plate， pay attention to the direction of the detachable back plate, refer to the up arrow.

3, Natural Gas (Methane) VS LPG (Propane)

Natural Gas is typically supplied through a main utility line connected to your home, which is comprised of methane gas and much lighter than air. If leakage, natural gas rises towards ceiling and accumulates in areas near ceiling, mount your detector around 30cm (12 inches) away from the ceiling and 1.5~3 meters away from gas supply to ensure the earliest opportunity to detect methane leak.

Propane is typically supplied to homes via delivery truck in liquid form and stored near the home in propane tanks, and much heavier than air and will collect at lower levels. Mount detector around 30cm (12 inches) away from the floor and 1.5~3 meters away from gas supply to ensure the earliest opportunity to detect a propane leak.

Protectmeter Natural Gas Detector-Y301

Monitor Gas Leakage 24 hours for family safety

Y301 combustible gas detector is directly plugged into power socket to monitor constantly and can give out a visual and audible alarm when gas concentration is above 5% LEL. Alarm level ranges from 0% to 20% of LEL for multiple combustible gases including methane, propane, coal gas, town gas, LNG etc.

Y301 and Y302 are used for 24h gas monitor and detection, for find and locate exact gas leak point, refer to product Y201.